The Essentials line provides a highly affordable entry into the world of Cordial's True-to-the-Source™ audio with a wide range of professional products at decidedly musician-friendly prices. The secret? Cordial's engineering, designs, and attention to quality and detail are cost-reduced via offshore manufacturing and the use of Neutrik REAN® plugs. Like their German counterparts, Essentials products use Cordial's 99.99% pure virgin (non-recycled) oxygen-free copper and are manufactured to exacting specifications.
Features include:
• Cabling designed and manufactured to Cordial's exacting specifications
• 99.99% pure virgin oxygen-free copper core and shield for optimum signal transmission
• High-density copper shield for electrical noise rejection
• Noise-eliminating core sleeve
• Low capacitance/low resistance
• Hand-soldered Neutrik REAN® connectors
• Competitively priced/superior performance
• Lifetime EZ-Swap Limited Warranty
If you're looking for a 1x 3.5 mm stereo jack plug to 2x male XLR connectors, our CFY WMM-LONG Y audio cable should be your first choice, e.g. to quickly connect a pair of studio monitors or a mixing desk directly to a smartphone or notebook. Due to a wire cross-section of 2x 0.22mm² the splitter cable is flexible and easy to lay. The part of the cable in front of the splitter is approx. 15cm long. You will find red/black markings for better left/right distinction directly on the connectors, which, as usual, come from Neutrik® (REAN made by Neutrik®) and are hand soldered.
Features include:
• Cabling designed and manufactured to Cordial's exacting specifications
• 99.99% pure virgin oxygen-free copper core and shield for optimum signal transmission
• High-density copper shield for electrical noise rejection
• Noise-eliminating core sleeve
• Low capacitance/low resistance
• Hand-soldered Neutrik REAN® connectors
• Competitively priced/superior performance
• Lifetime EZ-Swap Limited Warranty
If you're looking for a 1x 3.5 mm stereo jack plug to 2x male XLR connectors, our CFY WMM-LONG Y audio cable should be your first choice, e.g. to quickly connect a pair of studio monitors or a mixing desk directly to a smartphone or notebook. Due to a wire cross-section of 2x 0.22mm² the splitter cable is flexible and easy to lay. The part of the cable in front of the splitter is approx. 15cm long. You will find red/black markings for better left/right distinction directly on the connectors, which, as usual, come from Neutrik® (REAN made by Neutrik®) and are hand soldered.